Description
WE ARE RICH ELECTRONICS
PURCHASERS OF SURPLUS
ELECTRONIC COMPONENTS
AND EQUIPMENT!
For sale here we have the above part…
5 Pieces
1.27mm Pitch!
These do not have a polarity notch and so could be inserted any way up!
IDC – Insulation Displacement Connector
Please note! these are not standard 2.54mm pitch at 1.27mm pitch they are to suit-high density ribbon cable
Ribbon cable is laid in the gap between connector pins and top clamp, exerting pressure will push the clamp down sandwiching the flat cable on to the jaws of the connector pins, thereby displacing the insulation and making contact with the copper conductor. Special tooling is available for this job but with care and the aid of a vice the electronics enthusiast should be able to achieve satisfactory results.
Number of Contacts: 10
Number of Rows: 2
Gender: Male
Pitch: 1.27mm
Mounting Type: Ribbon Cable Mount
Body Orientation to Ribbon Cable: Right Angle
Termination Method: IDC
Current Rating: 0.5A
Contact Plating: Gold over Nickel
Minimum Operating Temperature: -65°C
Maximum Operating Temperature: +105°C
Voltage Rating: 30 Vac
Housing Material: Liquid Crystal Polymer
Contact Material: Phosphor Bronze
These parts came to us as part of a lot of surplus stock from a large manufacturing Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’. They are however in good condition, the photographs are representative of this and, as with all our products they come with a full guarantee.
PLEASE NOTE!
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.