Description
WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
SURPLUS ELECTRONIC
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
IMO GY2A1 Relay (Now discontinued replaced by HY series)
25A high capacity relay able to withstand momentary voltage drops to 50% rated;
Manufactured to VDE 0435, CUR/TUV approvals
Flame resistant materials used (UL94);
High operating frequency.
Part no breakdown
Series: GY
Poles: 2A − Double pole double make (2NO)
Contacts: 1 − faston 6,3х0,8
Specification for GY series
Parameters | GY1A | GY2A | |
---|---|---|---|
Rated load | resistive | 30A/250VAC | 25A/250VAC |
inductive | 25A/250VAC | 25A/250VAC | |
Rated current | 30A | 25A | |
Max switching voltage | 277VAC | ||
Max switching capacity | 7500VA | 6250VA | |
Operate time | 30ms max | ||
Release time | 30 ms max | ||
Max operate frequency | 18 000 ops/hour mechanical, 900ops/hour at max load | ||
Dielectric strength | between coil and contact | 4000VАС/1 min | |
Ambient operating temperature | -55° ~ +70°C | ||
Service life | mechanical | ≥5 000 000 | |
electrical | ≥100 000 | ||
Contacts material | AgSnO | ||
Voltage range | AC80~110%; DC75~110% | ||
Power consumption | 1.7VA~2.7VA/1.9W | ||
Weight | ~ 90g |
Coil data
Rated voltage, V | AC | DC | ||
---|---|---|---|---|
Coil resistance, Ω | Rated current, mA | Coil resistance, Ω | Rated current, mA | |
12 | − | 138 | 75 | 160 |
24 | − | 74 | 300 | 80 |
100/120 | − | 18.7/22.1 | 6300 | 17.4 |
200/240 | − | 9.1/10.8 | − |
Relay, High Switching Capacity 2PNO 25A, 24VAC Coil, Push On Faston Terminals or Solder
Approximate Coil Current 74mA
DPNO – Double Pole Normally Open
To switch up to 25A 250VAC
1HP 125VAC
2HP 277VAC
6 Terminals (6mm faston terminals push fit or solder) marked 1,2,3,4,5,6
1 and 2 are the coil (bright natural brass finish), 3 and 4 and 5 and 6 are the 2 Poles (bright natural copper finish).
These relays have a “TV10” rating (other TV ratings TV-3, TV-5, TV-8, TV-15) which characterizes their suitability for loads with high inrush currents. A TV10 relay would be rated for 10A steady state current and up to 141A of inrush current. TV rating is a UL switch rating meaning that the the switch can be used in some devices that may have high inrush current when the switch is turned on. For examples, monitors, computers, televisions or amplifiers or other power supplies can have a high inrush current that can have a negative impact to the switch.
These are now discontinued replaced by the HY series which are similar in some respects, for current datasheet on this series go to…
https://technical.imopc.com/hy.pdf
- PLEASE NOTE!These parts came to us as part of a lot of surplus stock from a large distribution Co. Having been in storage for some years we have classified them as ‘new other’. However they are stored with us still in original sealed bags and pristine, the photographs above are representative of their general appearance, being of some of our actual stock, and, as with all our products they come with a full guarantee.
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.