Description
WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
SURPLUS ELECTRONIC
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
1 Piece
IP67 Sealed ABS Plastic Junction Box
Type PSB3
TG3 = Grey/Clear Lid
BB3= Black/Black Lid
Suitable for Housing Electronic Circuits/Projects
Rated IP 67
Ingress Protection ratings are defined in international standard EN 60529 (British BS EN 60529:1992, European IEC 60509:1989).
They are used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture.
IP 67 Enclosures – IP rated as “dust tight” and protected against immersion.
These well constructed enclosures have a thick toughened wall design, with integral seals and two knock out threaded holes at each end to accept cable glands, approx 20mm diam.
The seal between base and lid is achieved by means of an all round tongue and groove type system, the grove in the lid is fitted with a rubber sealing ring when the lid is screwed down the tongue on the base compresses the rubber, to seal the box.
The screw down lid is retained by 4 recessed crosspoint screws.
External Dimensions Size 139mm long x 80mm wide x 53mm deep.
The side walls are 4mm thick and the end walls are a maximum of 7mm thick in the centre.
Please note the 4 columns in each corner which house the fixing screws take up some of the internal space.
There are 4 small lugs centralised along the sides internally in the base. (See photos)
PLEASE NOTE!
These enclosures came to us as part of a lot of surplus stock from a large distribution company and have been kept in storage for some time, they are however pristine, stored with us sealed in original packaging and in good serviceable condition, the photographs are representative of their general appearance, being of some of our actual stock, and, as with all our products they come with a full guarantee.
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.
