Fresnel CLB300CTP Clear Lens+SPC125 Spacer for 3+5mm LED’s 5 Pieces OM0651

£7.00

89 in stock

SKU: OM0651 Category:

Description

WE ARE RICH ELECTRONICS

WE PURCHASE AND RECYCLE

SURPLUS ELECTRONIC

COMPONENTS AND EQUIPMENT!

For sale here we have the above…

5 Pieces

The CLB300CTP is a Clear Transparent Lens Mount for 3 and 5mm LED’s of any colour. 

The SPC125 is a spacer provided for use on panels less than 4.8mm thick. 

Visibility: Produces up to 180 degrees of viewing angle using standard 3 and 5 mm LEDs 

Brightness: Utilizes striated lines and Fresnel rings to increase apparent brightness up to 125% and viewing angle up to 180 degrees with either diffused or non diffused LEDs.

Protection: Helps prevent IC failures caused by electrostatic discharge (ESD). 

Simply walking across a carpet can generate 10,000 volts. 

Introduction of this ESD thru an exposed panel mounted LED is capable of damaging or destroying a semiconductor. 

A mounted LED helps guard components from ESD up to 16kV while affording the LED physical protection. 

Requires no assembly tools; just snap into a panel opening and insert LED. 

Cost effective operation is complete in only 6 seconds

Simple Two-Step Installation
Recommended LEDs 3 & 5mm

1. Snap the Fresnel lens into the panel hole
2. While holding it tight to the panel with your finger, insert the LED
into the lens from the back

Specifications: 

Material : Lens – polycarbonate

Spacer – nylon. (U.L. listed materials) Spacer used on panels less than 4.8mm thick

Mounting : Mounts thru front of panel
Mounting holes should be deburred but not chamfered
3 mm (SML 190, SMB 200) mounts in a .171 ± 0 .002 (4.34 mm) hole on 1/4 inches centre
Panel thickness for SML 190, 1/32 inches to 1/16 inches; SMB 200, 1/16″ to 1/8″, 5 mm (CLF 280, CLB 300, CLR
301) mounts in a 0.25 ± .002 (6.35 mm) hole on 3/8 inches centre
Panel thickness for CLF 280, 1/16 inches to 1/8 inches; CLB 300 and CLR 301, 1/32 inches to 1/4 inches; for
panels less than 3/16 inches, use SPC 125 spacer.

For datasheet GO TO…

https://www.farnell.com/datasheets/1520777.pdf

PLEASE NOTE!

These parts came to us as part of a lot of surplus stock from a large Milspec type Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’. They are however pristine, stored with us still in their original packaging and ‘as new’ in all respects, the photographs are representative of their excellent condition, and, as with all our products they come with a full guarantee. 

If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.

Additional information

MPN