Philips PCF8582C-2 256 × 8-bit CMOS EEPROM with I2C-bus Interface OMA047D

£15.00

338 in stock

Description

WE ARE RICH ELECTRONICS

WE PURCHASE AND RECYCLE

SURPLUS ELECTRONIC

COMPONENTS AND EQUIPMENT!

For sale here we have the above…

1 Piece

8 Pin DIL Package

Description 

The PCF8582C-2 is a floating gate Electrically Erasable Programmable Read Only Memory (EEPROM) with 2 kbits (256 × 8-bit) non-volatile storage. By using an internal redundant storage code, it is fault tolerant to single bit errors. This feature dramatically increases the reliability compared to conventional EEPROMs. Power consumption is low due to the full CMOS technology used. The programming voltage is generated on-chip, using a voltage multiplier. Data bytes are received and transmitted via the serial I2C-bus. Up to eight PCF8582C-2 devices may be connected to the I2C-bus. Chip select is accomplished by three address inputs (A0, A1 and A2). Timing of the E/W cycle is carried out internally, thus no external components are required. Programming Time Control (PTC), Pin 7, must be connected to either VDD or left open-circuit. There is an option of using an external clock for timing the length of an E/W cycle.

Features
■ Low power CMOS:
◆ 2.0 mA maximum operating current
◆ maximum standby current 10 µA (at 6.0 V), typical 4 µA
■ Non-volatile storage of 2 kbits organized as 256 × 8-bit
■ Single supply with full operation down to 2.5 V
■ On-chip voltage multiplier
■ Serial input/output I2C-bus
■ Write operations:
◆ byte write mode
◆ 8-byte page write mode (minimizes total write time per byte)
■ Read operations:
◆ sequential read
◆ random read
■ Internal timer for writing (no external components)
■ Internal power-on reset
■ 0 kHz to 100 kHz clock frequency
■ High reliability by using a redundant storage code
■ Endurance: 1,000,000 Erase/Write (E/W) cycles at Tamb = 22 °C
■ 10 years non-volatile data retention time  

■ Pin and address compatible to: PCF8570, PCF8571, PCF8572, PCA8581 and
PCF85102
■ Pin compatible with a different address to PCF85103
■ ESD protection exceeds 2000 V HBM per JESD22-A114, 150 V MM per
JESD22-A115, and 1000 V CDM per JESD22-C101
■ Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
■ Offered in DIP8 and SO8 packages.          

Genuine Philips parts date coded 9223

What you see in the above photo is what you will get, ie the picture is of one of our actual stock.

Quantity available at time of listing 400+ pieces as new and in original Philips tubes. 

For datasheet search…Philips PCF8582C-2

Or go to…

https://www.nxp.com/docs/en/data-sheet/PCF8582C_2.pdf

PLEASE NOTE!

These parts came to us as part of a lot of surplus stock from a large ‘Milspec ‘ type Co. and have been kept in storage for a time, they are however pristine,  stored with us still in their original packaging and ‘as new’ in all respects, the photographs are representative of their excellent condition, and, as with all our products they come with a full guarantee. 

If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.

Additional information

Brand

MPN