Power Supply PCB In 240VAC Out 5VDC 2A and 12VDC 2.5A OM0324

£12.00

76 in stock

SKU: OM0324 Category:

Description

WE ARE RICH ELECTRONICS

WE PURCHASE AND RECYCLE

SURPLUS ELECTRONIC

COMPONENTS AND EQUIPMENT!

For sale here we have the above…

1 Piece

Quality Power Supply PCB

These power supplies were intended for use in a TV set top internet box and were made to the highest quality, follow the simple instruction sheet supplied and a very useful, stable 5v @ 2A & 12Vdc @ 2.5A power supply can be yours at a fraction of the usual cost.

PCB Dimensions:  170 mm x 46 mm and is 38 mm high to its highest component.

Purchasers should be aware that these PCB’s require a small modification prior to use which should be carried out by persons qualified to do so, ie qualified electronics engineers.

Instructions for use

Input (240VAC) via the connector on the far left of the PCB there are 2 pins, the top one (marked CON1) is neutral the bottom pin is the live input, if mounting in a metal case it will be necessary to provide an earth!

At the other end of the PCB, 2 sets of wires can be seen. Firstly deal with the purple, green and black loom, – terminate the purple wire it is not required, then the green and black wires need to be connected together, a little solder and a piece of heat shrink tube does the job nicely. The remaining loom of – yellow, black, black, and red wires now provide the output voltages:-

Yellow giving 12V 2.5A. Red giving 5V 2A.  Both blacks are common.

A sheet containing the above instructions will be supplied with the PCB.

Study the photographs carefully, if you cannot use the PCB ‘as is’ i.e. a working 12 and 5 volt PSU consider the good quality components that could be reclaimed…

1 x OEG 12V Relay:  OSA-SH-2120M5

Coil Voltage
Contact Form
DPST-NO (2 Form A)
Contact Rating (Current)
Switching Voltage
240VAC, 30VDC – Max
Coil Current
45 mA
Coil Type
Non Latching
Features
Termination Style
PC Pin

1 x Okaya noise suppression capacitor RE474 0.47uF 275V

View datasheet…

https://pdf1.alldatasheet.com/datasheet-pdf/view/319382/OKAYA/RE474-L.html

1 x K84382A 8PDIP linear Integrated Circuit Current mode PWM controller

View datasheet…

https://pdf1.alldatasheet.com/datasheet-pdf/view/319382/OKAYA/RE474-L.html

Plus loads of other transistors, diodes, capacitors, resistors, coils and a neat 12v transformer.

Recent feedback:

Excellent seller, this little SMPS makes a perfect supply for building Raspberry Pi based network streamers. Highly recommended”.

PLEASE NOTE!

These parts came to us as part of a lot of surplus stock from a large manufacturing Co. and have been kept in storage for a time, they are however pristine,  stored with us still in their original packaging, the photographs are representative of their excellent condition, being of one of our actual stock, and, as with all our products they come with a full guarantee. 

If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.

Additional information

MPN