Description
2 Pieces
Good quality with silver plated pins and contacts
Double pole double throw, 3 position PCB mount.
DPDT = Double Pole (Double throw is another way of specifying Change Over)
= Double Throw (Moves twice giving 3 positions)
So, switch function is as follows (looking at the switch pins from below)
SEE LARGER DIAGRAM IN GALLERY ABOVE
When switch actuator is to the left, single pin top far left connects to the 3 pins directly below it ON Left
When actuator is in centre position all connections are OFF
When actuator is to the right, single pin bottom far right connects to the 3 pins directly above it ON Right
ON OFF (Centre) ON
Turns on 3 circuits to the left All circuits off Turns on 3 circuits to the right
Metal enclosed with slotted actuator and 2 fixing screw holes tapped M2.
Suited to signal switching applications model making, model railway, electronic projects etc. etc.
Low voltage use only 12v – 24v etc.
Switch rating 250mA @ 50v (AC or DC)
NOT SUITABLE FOR MAINS!
8 silver plated solder pins to suit PCB mounting or direct solder to wire
24mm Long x 8.4mm Wide and would sit approx 7.8mm up off the PCB
Slotted actuator lever 6.8mm long 4mm wide x 1.8mm thick, Slot required 10 x 2mm.