This diagram is of a similar product the basic design is the same but is for guidance only, see the photographs for the actual pillars you will receive.
BOTTOM WINGED SNAP FIT PEG AFFIXES THE SUPPORT TO THE CHASSIS
TOP SNAP FIT PEG SECURES THE PCB TO THE SUPPORT
“A” Measurement on diagram above = 23mm
23mm High Nylon Locking PCB Support Pillar With 4mm PCB Hole and 4.75mm Chassis Hole
Locking PCB Pillars
Nylon PCB support pillar. This type snaps into place on both the chassis and the board and requires no fixing screws.
Can be fitted and released by hand
|Chassis Hole Diameter||4.75mm|
|PCB Hole Diameter||4mm|
|PCB Thickness||1 to 3mm|
- These came to us as part of a lot of surplus stock from a large ‘Milspec’ type Co. having been in storage for some time we have classified them as ‘new other’. Despite being ‘old new stock’ these are good quality and still perfectly serviceable, stored with us still in original sealed bags.