Description
WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
SURPLUS ELECTRONIC
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
A sheet of 28 self adhesive rubber feet.
Description
Hemispherical bumper feet are commonly used for sound dampening applications. The domed shaped bumpers work best for softening cabinet doors from slamming, reducing noise, and extending the life of the cabinets. Versatile round bumpers are found on the bottom of laptop computers to prevent sliding on any surface and smaller bumper profiles are used on the inside to protect the laptop screen and keyboard when closing it. Small round bumpers are used on standoffs for glass shelves. Simply peel and stick the bumper foot to your required location. These bumpers can be used everywhere and the application possibilities are endless.
- Manufactured in the USA
- 3M Bumpon™ SJ5003
- 100% Moulded Polyurethane
- Easy “Peel-Off” Application, Non-Staining, Non-Skidding, and Non-Marring
- Superior Abrasion Resistance, Vibration and Shock Dampening
- Superb Coefficient of Friction and Resistance to Skidding, Crack-Resistant and Resilient
- UL Recognized Components, RoHS and WEEE Compliant
- Diameter .440 inches (11.1mm) x Height .200 inches (5.1mm)
Pressure sensitive rubber adhesive backed polyurethane protective bumper. Good energy absorption on impact.
Adhesive Type
|
Natural Rubber (R30)
|
Applications
|
Garbage Compactor – Cushioning Stops, Small Electronic Device Cushioning Stops, Small Electronic Device Feet, Small Kitchen Appliance Feet
|
Availability
|
Stocked
|
Backing Material
|
Polyurethane
|
Hardness
|
72 Shore M
|
Height-Thickness Range (metric)
|
5.1 mm
|
Market
|
Facilities Management
|
Market Segment
|
Appliances, Automotive, Cabinetry, Electronics
|
Overall Diameter (Metric)
|
11.1 mm
|
Overall Height (Metric)
|
5.1 mm
|
Overall Length (Metric)
|
11.1 mm
|
Overall Width (Metric)
|
5.1 mm
|
Primary Liner
|
Translucent Polyester Film
|
Product Colour
|
Black
|
Product Form
|
Moulded
|
Product Key
|
SJ5003
|
Product Series
|
SJ5003
|
Product Type
|
Bumper
|
Segment
|
Electrical
|
Shape
|
Circular-Hemisphere
|
Substrates
|
ABS, Acrylic, Glass, Metal, Polycarbonate, Polyethylene, Polypropylene, Wood
|
Width-Diameter
|
11.1 – 5.1 mm
|
Will stick to almost any surface to form a protective barrier between laptops/instruments/equipment and desk or table tops.
Rubber feet on the bottom of your laptop are as important as the hard drive and monitor! Well, maybe that is not so true, but they are critical and greatly contribute to your computer’s health. When laptops run, they create heat. To prevent them from overheating, laptop rubber feet raise and elevate the laptop enough from the tabletop surface to allow an air flow. Without bumpers, laptops can overheat, causing it to shut off automatically, freeze, and even damage your computer battery.
Sometimes, the factory issued rubber laptop feet on the bottom of laptops fall off. Luckily, Bumper Specialties laptop replacement feet are easy to apply and stay secured. Just peel them like a sticker, and place them on the bottom of your laptop, easy as that! No screws or glue are required. Replacing your laptop feet is easy!
Recent feedback “Great item, I’m using them on my Sony A6000 and Sony A7 cameras. Rapid delivery.”
For datasheet search…3M Bumpon SJ 5003
Or go directly to…
https://multimedia.3m.com/mws/media/117314O/3m-bumpon-protective-products-molded-shapes-colored-and-clear.pdf
PLEASE NOTE!
These parts came to us as part of a lot of surplus stock from a large distribution Co. and have been kept in storage for a time, they are however pristine, stored with us sealed in original packaging and in good serviceable condition, the photographs are representative of their general appearance, being of some of our actual stock, and, as with all our products they come with a full guarantee.
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.