Description
WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
SURPLUS ELECTRONIC
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
1 Piece
2 x 64 Way DIN 41612 connectors plus 2 x 64 way wire wrap through hole pins one end, 2 x 10 way socket plus 2 x 10 way wire wrap plug the other.
Used for experimentation, prototyping etc.
Dimensions W. 170 x L. 233 x 1.6mm Thick
Prototyping or Experimentation Boards
Manufactured from epoxy glass material.
Card thickness is 1.6 mm.
Copper is 305 g/m (1 oz/ft).
DIN 41612 Edge connector pins and contacts are heavily gold plated (these were manufactured in the early 80’s).
The PCB is pre drilled in columns with holes 0.3″ apart and with a pitch spacing of 0.1″ i.e. they would suit the older DIL integrated circuits – TTL, CMOS LM regs etc. Each column of holes is numbered horizontally from 3 to 52 and vertically from 0 to 84 in stages of 3, i.e. 0, 3, 6, 9, etc.
Attribute | Value |
---|---|
Type | Experimentation board |
Connection | DIN 41612 |
Number of Contacts | 64 |
Base Material | Epoxy Glass Fabric Laminate |
Number of Sides | 2 |
Dimensions | 170 x 233 x 1.6mm |
Copper Thickness | 35µm |
FR Material Grade | FR4 |
Length | 170mm |
Thickness | 1.6mm |
Width | 233mm |
Manufactured by Cambion Electronic Products Ltd Sheffield England in the early 80’s when the gold plating was much heavier than nowadays
Sealed in original packaging.
PLEASE NOTE!
These parts came to us as part of a lot of surplus stock from a large distribution Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’. They are however pristine, stored with us still in their original packaging and ‘as new’ in all respects, the photographs are representative of their excellent condition, and, as with all our products they come with a full guarantee.
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.