Description

WE ARE RICH ELECTRONICS

PURCHASERS OF SURPLUS

ELECTRONIC COMPONENTS

AND EQUIPMENT!

For sale here we have the above parts…

C&K made in U.K.

C&K are part of the ITT Cannon group of companies

8060 Series Pushbutton Switch

ALTERNATE ACTION AND MOMENTARY PUSHBUTTON SWITCH

PLEASE NOTE: these are PCB mounting and have an integral switch support bracket,

THEY ARE NOT SUPPLIED WITH ANY OTHER HARDWARE I.E. NUT/WASHER.

Part no. Breakdown

8161:  Switch Function – SPDT On-On

S:       Actuator or Plunger – .710” high plunger with .375” dia. cap

H9:     Bushing – .300” high, flat, hi torque

V3:     Terminations – .460” high, V-bracket

B:       Contact Material – Gold

E:       Seal – Epoxy

2:       Cap Colour – Black

Specifications
CONTACT RATING: 0.4 VA MAX. @ 20 V AC OR DC MAX.
ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 65ºC
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
NOTE: Any models supplied with B or G contact material are RoHS compliant.
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled
polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
CAP & FRAME: Nylon, black standard.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
END CONTACTS: B contact material: Copper alloy Gold plated.
CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. 
TERMINAL SEAL: Epoxy. Refer to soldering and cleaning
in Technical Data Chapter.
HARDWARE: Nut & Locking Ring NOT SUPPLIED with this PCB mount version.

PCB MOUNT SWITCH SUPPORT: Steel, matte-tin plated.

Mfr	C&K
Series	8060
Package	Loose bagged
Part Status	Active
Mounting Type	PCB Through Hole
Type	Standard
Circuit	SPDT
Switch Function	On-On
Current Rating (Amps)	0.4VA (AC/DC)
Actuator Type	Round, Button
Colour – Actuator/Cap	Black
Hardware (nut and washer)	Not supplied (PCB Mount)
Termination Style	PC Pin
Moisture Sensitivity Level (MSL)	Unlimited
Features	Epoxy Sealed Terminals
Panel Cut Out Dimensions	6mm Diameter Hole
Operating Temperature	-30°C ~ 65°C
Mechanical Life	–
Electrical Life	50,000 Cycles
Voltage Rating – AC	20 V
Voltage Rating – DC	20 V

Environmental Classifications
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Affected
ECCN	EAR99
HTSUS	8536.50.9033

ACTION OF SWITCH

POSITION 1 – Switch unactuated button UP

SWITCH IS ON BETWEEN ONE SIDE CONTACT AND CENTRE CONTACT (CENTRE CONTACT AND OTHER SIDE CONTACT ARE OFF)

Switch is latched in this position so this circuit remains ON.

Actuate switch by press down till an audible click is heard – 

POSITION 2 – SWITCH CHANGES OVER – NOW ON BETWEEN CENTRE CONTACT AND OTHER SIDE CONTACT

Switch is MOMENTARY so when pressure released it returns back to UP – POSITION 1

BUT IT HAS LATCHED and and the circuit BETWEEN CENTRE CONTACT AND OTHER SIDE CONTACT remains ON

For datasheet…   Search C&K 8161SH9V3BE2

These parts came to us as part of a lot of surplus stock from a large Milspec type Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’. They are however in pristine condition still in their original packaging and ‘as new’ in all respects, the photographs are representative of their excellent condition, and, as with all our products they come with a full guarantee. 

PLEASE NOTE!