Description

WE ARE RICH ELECTRONICS

WE PURCHASE AND RECYCLE

SURPLUS ELECTRONIC

COMPONENTS AND EQUIPMENT!

For sale here we have the above…

1 Piece

Delta 70 x 70mm Fan and Heatsink Combo for CPU

Specifications

Mfr	Delta Electronics
Series	AUB
Package	Bulk
Product Status	Obsolete
Voltage – Rated	12VDC
Size / Dimension	Square – 70mm L x 70mm H
Width	15.00mm
Air Flow	24.9 CFM (0.697m³/min)
Static Pressure	0.126 in H2O (31.3 Pa)
Bearing Type	Superflo
Fan Type	Tubeaxial
Features	Speed Sensor (Tach)
Noise	33.5dB(A)
Power (Watts)	1.2 W
RPM	3800 RPM
Termination	3 Wire Leads
Ingress Protection	–
Operating Temperature	–
Approval Agency	CE, CSA, UR, VDE
Weight	–
Current Rating (Amps)	0.100A
Voltage Range	4 ~ 13.2VDC
Material – Frame	Plastic
Material – Blade	Plastic

Connection via 100mm 4 wire red, yellow, black and blue lead to 4 pin molex type plug (see photo’s)

Delta Part number (Fan) :   AUB0712MB

Delta Part number (Fan & Heatsink Combo) : FHSA7015S-1527

For full datasheets search both part no.’s

Or go directly to…

https://www.datasheetarchive.com/datasheet?id=e280530a159d6cc24fcc7e46331a336354ef8e&type=P&term=aub0712mb

These were designed to suit a variety of CPU’s….

AMD Lo-noise CPU Cooler –  AMD FM2/FM1/AM3/AM2/AM2+ A4/A6/A8 CPU 65W  also suits AMD Athlon/Sempron.

CPU type:  A4/A6/A8(Llano/Trinity APU 65W) Athlon X2 2XX (Regor 65W) Sempron 140 (Sargas 45W)

Weight : 175g

This really efficient cooling unit could be used for a multitude of applications. Check out the photographs to see if this inexpensive little fan heatsink combo could solve your overheating problems, what you see in the photographs is exactly what you will get.

The heatsink which is screwed to the fan has a 25mm² section with a lattice of thermally conductive compound squares (Dow-Corning TC-5121).

*See note below. 

These parts came to us as a result of a bulk purchase of surplus stock from a large OEM and have been kept in storage for a time, we have therefore classified them as ‘new other’. They are in good working condition, however….

*The pre applied heat sink paste may have dried out a little, the purchaser may find it necessary to apply a fresh coat of paste.

These are stored with us still in manufacturers bulk packaging.

PLEASE NOTE!

These parts came to us as part of a lot of surplus stock from a large distribution Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’, they are however pristine, stored with us sealed in original packaging, the photographs are representative of their general condition, being of some of our actual stock, and, as with all our products they come with a full guarantee.