TOGGLE SWITCH SINGLE POLE DOUBLE THROW
Distributed by Eaton in the UK manufactured by Cutler Hammer USA
THROUGH PANEL MOUNT
ALL FIXING HARDWARE IN PHOTOGRAPHS SUPPLIED, NUTS WASHERS SCREWS ETC.
Part no. MS35058-21
(also marked 8800K16)
This is a ‘latched’ type of switch ie if actuated the switch stays in the selected position when pressure is removed. It has a firm solid action as it clicks into each position.
3 position toggle, centre off.
Switch dolly actuator to one side – ON
To the middle – OFF
To the other side – ON
Eaton’s Military Purpose switches
are designed to meet the
requirements of MIL-S-83731 or
JAN-S-23. Sealed Switches have
a silicone rubber lever seal
assembled between the lever and
the bushing to resist the entrance
of contaminants such as dust,
sand or water into the
The switch mechanisms are
completely enclosed to resist the
entrance of contaminants into the
switch. All metal parts are plated
to resist corrosion.
For full datasheet copy and paste:- http://www.datasheets360.com/pdf/-8467380378791979883
|Switch Type||TOGGLE SWITCH|
|Actuator Type||Sealed lever|
|Body Breadth||15.75 mm|
|Body Height||26.42 mm|
|Body Length or Diameter||28.45 mm|
|Contact AC Max Rating R Load||10A@115VAC|
|Contact Current(AC)-Max||10.0 A|
|Contact Current(DC)-Max||25.0 A|
|Contact DC Max Rating R Load||25A@28VDC|
|Contact Voltage(AC)-Max||115.0 V|
|Contact Voltage(DC)-Max||28.0 V|
|Mounting Feature||PANEL MOUNT-THREADED|
|Operating Temperature-Min||-18.0 Cel|
|Operating Temperature-Max||66.0 Cel|
Panel hole required 11.5mm
Length of toggle (pear shaped dolly) 17mm
Length of threaded section 12mm (fixing nut & locating washer supplied)
Threaded screw terminal lugs on the underneath of the body are approx 8mm long ( 3 screws & washers provided).
These come to us as part of a lot of surplus stock from a Mil.spec. type company.
Made in the U.S. they are very good quality complete with all nuts, screws etc.
These came to us as part of a lot of surplus stock from a large ‘MILSPEC’ type Co. In pristine condition and stored with us still in their original packaging these switches work perfectly, but as they have been in storage for some time we have classified them as ‘new other’.
SURPLUS STOCK ?????
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.