Marquardt Rocker Switch 1552.4602 DPST Panel Mount 90′ PCB Pins 16A 250V OM0584


22 in stock

SKU: OM0584 Category:



Slimline Rocker switch 

Double pole single throw


RU, SA, D, N, S, ETC. Approved

16A 250VAC

2HP 250VAC

 1 piece 

Product number 1552.4602
Actuator colour – black / printing  -white
Product family Rocker switches
Actuation type direct
Weight 7.000g
Switch on continuous current (capacitive) 5A
Inrush current (capacitive) 100A
ROHS conform yes
Switching function ON / OFF switch (DPST)
Material fixed contact Ag
Number of poles 2 – pole
connections PCB terminal, angled
Mechanical life endurance 5E4
Rating IEC 10 (4) A 250V AC 5E4
16 (4) A 250VAC 1E4
Rating North America 16A 125 VAC 1 HP
16A 250V AC 2 HP
Contact resistance (new condition) < 100 (1A 12VDC) mOhm
Insulation resistance (new condition) > 100 (500VDC) MOhm
Voltage strength at 250V function insulation / basic insulation 1500V
reinforced insulation 3000V
small contact distance 500V
Proof tracking 250PTI
Insulation spacing acc. to EN 61058 for reinforced or double insulation
Protection type Connection IP40
Ambient temperature connection side -20 °C … +100 °C
Ambient temperature Actuation side min. -20 °C … +55 °C
Storage temperature -40 °C … +80 °C
Flammability UL 94 V-2 Product number:   1552.4602

Actuators and additional actuators rocker: PA, black, identification white
Housing description housing: PA, black, lower lying flange
Connection surface bearing connection silver plated
Contact material Ag
Contact distance ≥ 3 mm
Rating Code UL R 38
Contact type lifting contact
Plug force of the terminals ≤ 80 N
Operating force 3 – 5 N
Approval marks CSA / UL / ENEC 05
Suitable for appliances of protection class II
Additional labeling site, year, week of manuf. acc. to DIN EN 60062
Type of fastening Snap fastening
Degree of pollution 3
Rated impulse withstand voltage 2500 V

Connections:   PCB terminal right angled

For datasheet copy and paste:-

Designed so it can be panel mounted the switch has 2 push fit clips, if required the right angled contacts can be soldered directly to a PCB or they could be hard wired.

Fixing hole required if panel mounting

Dimensions:- 23mm x 12mm

With the right angled contacts used as designed – for flat PCB mounting, they leave the back of the switch and bend down at a 90′ angle, the face of the switch then displays I on the left and O on the right to indicating on or off.

Additional information