Maxim MAX1232ESA Supervisory Circuits Microprocessor Monitor OT0038

£6.00

900 in stock

SKU: OT0038 Category:

Description

WE ARE RICH ELECTRONICS

WE PURCHASE AND RECYCLE

SURPLUS ELECTRONIC

COMPONENTS AND EQUIPMENT!

For sale here we have the above…

5 Pieces

General Description
The MAX1232 microprocessor (μP) supervisory circuit
provides μP housekeeping and power-supply supervision
functions while consuming only 1/10th the power of the
DS1232. The MAX1232 enhances circuit reliability in μP
systems by monitoring the power supply, monitoring the
software execution, and providing a debounced manual
reset input. The MAX1232 is a plug-in upgrade of the
Dallas DS1232.
A reset pulse of at least 250ms duration is supplied on
power-up, power-down, and low-voltage brownout conditions (5% or 10% supply tolerances can be selected
digitally). Also featured is a debounced manual reset
input that forces the reset outputs to their active states
for a minimum of 250ms. A digitally programmable watchdog timer monitors software execution and can be programmed for timeout settings of 150ms, 600ms, or 1.2s.
The MAX1232 requires no external components.
Applications
● Computers
● Controllers
● Intelligent Instruments
● Critical μP Power Monitoring

Specifications

Voltage Monitor
SMD/SMT
SOIC-8
4.5 V, 4.75 V
1 Input
Active High, Active Low, Open Drain
Manual Reset
Watchdog
No Backup
1.2 s
5.5 V
– 40 C
+ 85 C
10 %
MAX1232
Reel
Cut Tape
Reel
Brand: Analog Devices / Maxim Integrated
Chip Enable Signals: No Chip Enable
Height: 1.5 mm
Length: 5 mm
Operating Supply Current: 200 uA
Operating Supply Voltage: 5 V
Overvoltage Threshold: 4.74 V, 4.49 V
Power Fail Detection: No
Product Type: Supervisory Circuits
2500
Subcategory: PMIC – Power Management ICs
Supply Voltage – Min: 4.5 V
Undervoltage Threshold: 4.5 V, 4.25 V
Width: 4 mm
Part # Aliases: MAX1232
Unit Weight: 540 mg
For datasheet search…MAX1232ESA

Or go directly to…

https://www.aipcba.com/datasheet/pdf/max1232esat-cm3178111-f7666863.html?page=1

PLEASE NOTE!

These parts came to us as part of a lot of surplus stock from a large ‘Milspec’ Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’. They are however pristine, stored with us still in their original packaging, the photographs are representative of their excellent condition, being of some of our actual stock, and, as with all our products they come with a full guarantee.

If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.

Additional information

MPN

Brand