WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
Available in Black or Brown – please specify when ordering otherwise either may be sent.
20 PLCC Surface Mount IC socket
20 Tin Plated Contacts
PLCC – 20 Pin Surface Mount Socket – sits flush to PCB, pins flat, NOT THROUGH HOLE
Designed to be flow soldered.
UL94 V-0 rated polyphenylene sulphide glass reinforced insulator
Phosphor bronze contacts
Maximum operating voltage is 250VAC
Maximum current rating is 1A
Operating temperature range from -55°C to 105°C
Brand new tubed.
PLCC SOCKET, 20 POS, SMD Connector
Type: PLCC Socket
No. of Contacts: 20
Pitch Spacing: 1.27mm
: Phosphor Bronze
Contact Plating: Tin
Socket Mounting: PC Board
These SMT PLCC Series Sockets are low profile, thin wall sockets designed to hold PLCC chips
They conform to all applicable EIA and JEDEC standards.
They have superior precision stamped contacts which provide consistent, high retention contacts for 44 pin chips.
Their open frame design allows easy solder joint inspection.
They are manufactured with Hi-Temp PBT to accommodate SMT soldering processes.
Chips are easily removed with a PLCC chip extractor, see our item no. 390651475624
PBT, Glass reinforced insulator
Insulator Colour Black or brown
Operating Temperature : -20°C to +85°C
Recommended Soldering Temperature : 235°C
Maximum Operating Voltage : 250V AC
Maximum Current Rating : 1A
Maximum Contact Resistance : 30mΩ
Minimum Insulation Resistance : 1,000MΩ
Dielectric Withstanding Voltage : 500V AC for 1 min
For generic datasheet (not same make but same spec.) go to…
These parts came to us as part of a lot of surplus stock from a large distribution Co. and have been kept in storage for a time, they are however pristine, stored with us still in their original packaging and ‘as new’ in all respects, the photographs are representative of their excellent condition, and, as with all our products they come with a full guarantee.
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.