Description
1 Piece
Flip-Flops 6-bit D-type positive-edge-triggered flip-flops with clear
16-CDIP -55’C to +125’C
Please note these are the Milspec Ceramic aerospace version with A 54 prefix
Supply Voltage 7V
Input Voltage 5.5V
Operating Free Air Temperature Range -55’C to +125’C
| Texas Instruments | ||
| Flip-Flops | ||
| 1 | ||
| TTL | ||
| Bipolar | ||
| Non-Inverting | ||
| Single-Ended | ||
| Single-Ended | ||
| 35 ns | ||
| – 0.8 mA | ||
| 16 mA | ||
| 4.75 V | ||
| 7 V | ||
| -55 C | ||
| + 125 C | ||
| Through Hole | ||
| PDIP-16 | ||
| Tube | ||
| Function: | D-Type Bus Interface | |
| Height: | 4.57 mm | |
| Length: | 19.3 mm | |
| Operating Temperature Range: | -55 C to + 125 C | |
| Series: | SN74174 | |
| Width: | 6.35 mm | |
| Brand: | Texas Instruments | |
| Number of Channels: | 6 | |
| Number of Input Lines: | 6 | |
| Number of Output Lines: | 6 | |
| Operating Supply Voltage: | 5.5 V | |
| Product Type: | Flip Flops | |
| Reset Type: | Master Reset | |
| Subcategory: | Logic ICs | |
| Unit Weight: | 1.628 g |
General Description
These positive-edge triggered flip-flops utilize TTL circuitry
to implement D-type flip-flop logic. All have a direct clear
input. Information at the D inputs meeting the setup and hold time
requirements is transferred to the Q outputs on the positive going edge of the clock pulse. Clock triggering occurs at a
particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock input
is at either the high or low level, the D input signal has no
effect at the output.
Features
54174 contains six flip-flops with single-rail outputs
Buffered clock and direct clear inputs
Individual data input to each flip-flop
Applications include:
Buffer/storage registers
Shift registers
Pattern generators
Typical clock frequency 40 MHz
Typical power dissipation per flip-flop 38 mW
These came to us as part of a lot of surplus stock from a large Milspec type OEM and have been kept in storage for some years, we have therefore classified them as ‘new other’. They are however unused and in pristine condition and as with all our products come with a full guarantee.
Date coded 8501
The photo shown is of the actual parts we have in stock (at time of listing 25 pieces), all are identical, same part no. and date code, and still in their original Texas tube.
For full datasheet search…54174J
WE PURCHASE SURPLUS ELECTRONIC COMPONENTS AND EQUIPMENT!
As many of our lines come in to us as surplus – sometimes from high end ‘Milspec’ type manufacturers we try to pass on our savings to our customers – often selling industrial grade or military spec components at a fraction of their original cost.
