Winslow W3124 3T 24 Pin Skinny DIL IC Socket 0.3in. Black 10 Pieces MBF010i

£6.00

46 in stock

SKU: MBF010i Category:

Description

 

Stamped IC sockets

Please note these are 0.3″ in width they suit a particular type of DIL chip (older TTL CMOS DIP ram etc.) not suitable for 0.6″ (eproms processors etc.)

10 Pieces

The W3100 Series uses a phosphor bronze contact with 2 plating options
RHoS compliant Tin or Tin/Lead . Moulding material is 30%GF PBT rated
to UL 94 V-0. Designed for automatic PCB loading machines features include; overstress protection, large target area for ease of IC insertion and
a 35 degree angled contact to prevent the IC leg from going behind the
contact during insertion.

For datasheet copy and paste:- 

 https://www.datasheet.live/index.php?title=Special:PdfViewer&url=https%3A%2F%2Fpdf.datasheet.live%2Fdatasheets-1%2Fwinslow_adaptics%2FW3124_4TRC.pdf

Mounting:   Through Hole

Number of Rows:   2

Contact Style:   Twin swipe

Mounting Style:   Straight

Termination Type:   Through hole PCB mount

Housing Profile:   Low

Device Type:    Used On DIP24 0.3″ chips

0.3″ between the 2 rows of 12 tinned pins

Overall dimensions 30.35mm long x 10.14mm wide

Supplied in an open frame design.

General Specifications. Unless stated all values are typical.
Contact
Resistance: 10m ohms
Current Rating: 10 amp cont. 2.0 amp peak.
Capacitance: 0.5pF
Material: Phosphor Bronze
Plating: W3100TRC Nickel 2.5 microns over Pure Tin 6.0 microns
W3100T 60/40 tin/lead 2/3 microns.
W3100G Gold in contact area only with solder tail microns over
plated Nickel 2.5 Pure Tin 6.0 microns
Insertion Force: 120/130 grams (1.18/1.27n) per pin 0.01” diameter.
Withdrawal Force: 50/70 grams (0.49/0.69n) per pin 0.01” diameter.
Point of contact: 0.061” (1.70mm) from top of socket.
Force to remove
From moulding: 1.0lb minimum
Moulding
Material: Glass-reinforced Polyester (PBT)
Insulation Resistance: 1010 Ohms (contact to contact) at 500VDC
Arc Resistance: 145 seconds at 23 degrees C
Electrical Strength: 121KV/cm at 23 degrees C
Dielectric Constant: 3.9 (48 hrs 90%RH) at 100Hz 23 degrees C
4.5 at 100Hz 121 degrees C
3.7 (48 hrs 90%RH) at 1MHz 23 degrees C
4.3 at 1MHz 121 degrees C
Dissipation Factor: 0.0077 (48 hrs 30%RH) at 100Hz 23 degrees C
0.0300 at 100Hz 121 degrees C
0.0150 (48 hrs 30%RH) at 1MHz 23 degrees C
0.0200 at 1MHz 121 degrees C
Volume Resistively: 3 x 1013ohms-CM (48 hrs 90%RH) at 25 degrees C
1013ohms-CM at 121 degrees C

Operating Temperature: -65 to 150 degrees C
Flammability: UL94V-0

THESE PARTS CAME TO US AS PART OF A “JOB LOT” OF SURPLUS STOCK ORIGINATING FROM A LARGE MILSPEC TYPE CO. 

THEY ARE NOT DATE CODED BUT WE KNOW THEY HAVE BEEN IN STORAGE FOR SOME YEARS –  HAND WRITTEN DATES ON SOME OF THE BOXES SUGGEST MANUFACTURE IN THE 1980’S

Made by Winslow the tubes are reassuringly marked “Made in Great Britain”

IS THERE IS SUCH A THING AS AN ANTIQUE ELECTRONIC COMPONENT ?

IDEAL IF YOU ARE LOOKING FOR OLD GOOD QUALITY COMPONENTS TO GIVE  AUTHENTICITY TO A RENOVATION PROJECT- PLEASE NOTE DUE TO THEIR AGE WE HAVE CLASSIFIED THEM AS “NEW OTHER” THOUGH THEY ARE IN PERFECT CONDITION.  

 

Additional information

Brand

MPN