Xperience/Mascot 9640 12 Volt 1Ah to 60Ah Lead Acid Battery Charger OM0928

£15.00

223 in stock

SKU: OM0928 Category:

Description

Xperience 3 Step Charger
Made by the Mascot Co. Norway
To suit 12 Volt  Lead Acid Battery 1Ah to 60Ah –
yes that’s any lead acid battery from a small 1 Ampere hour to the huge 60 Ah

These came to us as part of a bulk purchase of surplus stock, due to equipment changes they were no longer required.

We believe they were used as some kind of standby power supply should the mains fail, but looking at their general condition they have not suffered heavy use. They are sold by us as fully working and should provide lengthy service. – Don’t forget all our items come with a full guarantee!
3 step Charger indicated by a 3 colour red, yellow and green LED

Red – fully discharged

RED: THE CHARGER IS IN A CONSTANT CURRENT MODE AND CHARGE CURRENT IS A MAXIMUM 2.7A, THE BATTERY CAPACITY IS BETWEEN 0 AND 80%

Yellow – 75% charged

YELLOW: THE CHARGER IS IN TIMER/CONSTANT CYCLE VOLTAGE MODE, CHARGE CURRENT IS LESS THAN 2.7A, THE BATTERY CAPACITY IS THEN BETWEEN 80 AND 90% FULLY CHARGED

Green – fully charged – ready/standby

GREEN: CHARGE CURRENT IS VERY LOW LESS THAN 2.7A, THE BATTERY IS 100% FULLY CHARGED, THE CHARGE VOLTAGE IS AT FLOAT/STANDBY LEVEL (13.8V) THE BATTERY CAN BE LEFT CONNECTED FOR A LONG PERIOD OF TIME


PLUGS DIRECTLY INTO A UK 13A SOCKET OUTLET, IF USED ABROAD YOU WILL NEED A MAINS ADAPTER FOR YOUR RELEVANT COUNTRY, THIS IS NOT INCLUDED.

Please note:- these are fitted with an output lead 900mm long, terminated with a 5mm power jack plug with a 2.5mm diameter centre pin. This is a standard option when purchasing a 9640 from Mascot.

If you wish to convert this jack plug into anything else – say a pair of crocodile leads, we can supply a suitable cable mount jack socket…

Search for our item I.D. –  OM0864

This would connect to the output jack plug and to which one could solder 2 wires terminated in whatever connectors you want – Croc’s, ring or spade terminals etc, etc.

FOR CROCODILE CLIPS SEE OUR SHOP ITEM ID’s OMP1-02, OMP1-02C AND FOR LARGE ONES  OMP1-02B

Model: 9640
Please note:- The 9640 model charger is made by the Mascot company in Norway and normally retails at 
£40 ++.
Supplied by Mascot to exactly the same specification but made specifically for and branded “Xperience” to suit a particular Xperience product.

IF REQUIRED THIS PLUG COULD EASILY BE REPLACED WITH A PAIR OF BLACK AND RED CROCODILE CLIPS THOUGH WE RECOMMEND A QUALIFIED ELECTRONIC ENGINEER CARRY OUT ANY MODIFICATIONS !  

OUTPUT 14.7 VOLT DC 2.7A
– for initial boost charge
13.8 VOLT DC to READY/STANDBY
LIGHTLY USED – TESTED OK PRIOR TO DISPATCH !

MANUFACTURED IN NORWAY
PRIMARY INPUT: 210-240Vac 50-60hZ O.5Amp 

VARIOUS APPROVALS: CE etc.
THESE ARE A VERY LIGHT AND COMPACT INCORPORATING A SWITCH MODE TYPE POWER UNIT
MAIN CASING APPROX DIMS: L. 100MM X W. 60MM X H. 48MM

PURCHASERS PLEASE ENSURE THAT THE DATA GIVEN ABOVE, (OUTPUT VOLTAGE AND AMP-AGE, JACK PLUG SIZE ETC.) WILL BE SUITABLE FOR THEIR INTENDED USE.  

The 9640 part no. is marketed by the Mascot Co. 
For full datasheet copy and paste:- 
http://www.mascot.no/products?catalog=24&category=1311&product=143
 

Additional information

Brand

MPN