WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
Xperience 3 Step Charger
Made by the Mascot Co. Norway
Ideal for charging 12 Volt Lead Acid Batteries 1Ah to 60Ah – yes that’s any lead acid battery from a small 1 Ampere hour to the huge 60Ah
These came to us as part of a bulk purchase of surplus stock, due to equipment changes they were no longer required.
We believe they were used as some kind of standby power supply should the mains fail, but looking at their general condition they have not suffered heavy use. They are sold by us as fully working and should provide long service. – Don’t forget all our items come with a full guarantee!
Three Step Charger
Indicated by a 3 colour LED Display
Red, yellow and green
Red – fully discharged
RED: THE CHARGER IS IN A CONSTANT CURRENT MODE AND CHARGE CURRENT IS A MAXIMUM 2.7A, THE BATTERY CAPACITY IS BETWEEN 0 AND 80%
Yellow – 75% charged
YELLOW: THE CHARGER IS IN TIMER/CONSTANT CYCLE VOLTAGE MODE, CHARGE CURRENT IS LESS THAN 2.7A, THE BATTERY CAPACITY IS THEN BETWEEN 80 AND 90% FULLY CHARGED
Green – fully charged – ready/standby
GREEN: CHARGE CURRENT IS VERY LOW LESS THAN 2.7A, THE BATTERY IS 100% FULLY CHARGED, THE CHARGE VOLTAGE IS AT FLOAT/STANDBY LEVEL (13.8V) THE BATTERY CAN BE LEFT CONNECTED FOR A LONG PERIOD OF TIME
PLUGS DIRECTLY INTO A UK 13A SOCKET OUTLET, IF USED ABROAD YOU WILL NEED A MAINS ADAPTER FOR YOUR RELEVANT COUNTRY, THIS IS NOT INCLUDED.
Please note:- these are fitted with an output lead 900mm long, terminated with a 5mm power jack plug with a 2.5mm diameter centre pin. This is a standard option when purchasing a 9640 from Mascot.
If you wish to convert this jack plug into anything else – say a pair of crocodile leads, we can supply a suitable cable mount plug to jack socket adaptor…
Search for our item I.D. – OM0864
This would connect to the output jack plug and to which one could solder 2 wires terminated in whatever connectors you want – Croc’s, ring or spade terminals etc, etc.
FOR CROCODILE CLIPS SEE OUR SHOP ITEM ID’s OMP1-02, OMP1-02C AND FOR LARGE ONES OMP1-02B
Please note:- The 9640 model charger is made by the Mascot company in Norway and normally retails at
Supplied by Mascot to exactly the same specification but made specifically for and branded “Xperience” to suit a particular Xperience product.
OUTPUT 14.7 VOLT DC 2.7A
– for initial boost charge
13.8 VOLT DC to READY/STANDBY
LIGHTLY USED – TESTED OK PRIOR TO DISPATCH !
MANUFACTURED IN NORWAY
PRIMARY INPUT: 210-240Vac 50-60hZ O.5Amp
VARIOUS APPROVALS: CE etc.
THESE ARE A VERY LIGHT AND COMPACT INCORPORATING A SWITCH MODE TYPE POWER UNIT
MAIN CASING APPROX DIMS: L. 100MM X W. 60MM X H. 48MM
PURCHASERS PLEASE ENSURE THAT THE DATA GIVEN ABOVE, (OUTPUT VOLTAGE, JACK PLUG SIZE ETC.) WILL BE SUITABLE FOR THEIR INTENDED USE.
This 9640 model is now discontinued by the Mascot Co. but a datasheet can be obtained by searching for…Mascot 9640
Or go directly to…
These units came to us as part of a lot of surplus stock, they have been used and have been kept in storage for a time, they are however fully working (tested prior to dispatch) and in good serviceable condition, the photographs are representative of their general appearance being of a randomly selected sample from our actual stock, and as with all our products they come with a full guarantee.
Each Charger will be tested and put through its full charging cycle prior to dispatch.
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.