Description
WE ARE RICH ELECTRONICS
PURCHASERS AND RECYCLERS
OF SURPLUS ELECTRONIC
COMPONENTS AND EQUIPMENT!
For sale here we have the above part…
10 Pieces
Xperience 3 Step Charger
Made by the Mascot Co. Norway
To suit 12Volt Lead Acid Battery 1Ah to 60Ah
3 step Charger as indicated by a 3 colour LED
Red – fully discharged
RED: THE CHARGER IS IN A CONSTANT CURRENT MODE AND CHARGE CURRENT IS A MAXIMUM 2.7A, THE BATTERY CAPACITY IS BETWEEN 0 AND 80%
Yellow – 75% charged
YELLOW: THE CHARGER IS IN TIMER/CONSTANT CYCLE VOLTAGE MODE, CHARGE CURRENT IS LESS THAN 2.7A, THE BATTERY CAPACITY IS THEN BETWEEN 80 AND 90% FULLY CHARGED
Green – fully charged – ready/standby
GREEN: CHARGE CURRENT IS VERY LOW LESS THAN 2.7A, THE BATTERY IS 100% FULLY CHARGED, THE CHARGE VOLTAGE IS AT FLOAT/STANDBY LEVEL (13.8V) THE BATTERY CAN BE LEFT CONNECTED FOR A LONG PERIOD OF TIME
PLUGS DIRECTLY INTO A UK 13A SOCKET OUTLET, IF USED ABROAD YOU WILL NEED A MAINS ADAPTER FOR YOUR RELEVANT COUNTRY, THIS IS NOT INCLUDED.
Please note:- these are fitted with an output lead 900mm long, terminated with a 5mm power jack plug with a 2.5mm diameter centre pin. This is a standard option when purchasing a 9640 from Mascot.
CAN BE REPLACED WITH 50MM CROCODILE CLIPS SEE OUR SHOP ITEM NO. 252954011137
Crocodile-Clips – Our ID no. OM0823A
Model: 9640
Please note:- The 9640 model charger is made by the Mascot company in Norway and normally retails at
£40 ++.
Supplied by Mascot to exactly the same specification but made specifically for and branded “Xperience” to suit a particular Xperience product.
IF REQUIRED THIS PLUG COULD EASILY BE REPLACED WITH A PAIR OF BLACK AND RED CROCODILE CLIPS THOUGH WE RECOMMEND A QUALIFIED ELECTRONIC ENGINEER CARRY OUT ANY MODIFICATIONS !
OUTPUT 14.7 VOLT DC 2.7A
– for initial boost charge
13.8 VOLT DC to READY/STANDBY
LIGHTLY USED – TESTED PRIOR TO DISPATCH!
MANUFACTURED IN NORWAY
PRIMARY INPUT: 210-240Vac 50-60hZ O.5Amp
VARIOUS APPROVALS: CE etc.
THESE ARE A VERY LIGHT AND COMPACT INCORPORATING A SWITCH MODE TYPE POWER UNIT
MAIN CASING APPROX DIMS: L. 100MM X W. 60MM X H. 48MM
The 9640 part no. is marketed by the Mascot Co.
For full datasheet copy and paste:-
http://www.mascot.no/products?catalog=24&category=1311&product=143
These came to us as surplus stock from the original purchaser, we believe they were used as some kind of standby power supply should the mains fail, but looking at their general condition they have not suffered heavy use. They are sold by us as fully working and should provide lengthy service. – Don’t forget all our items come with a full guarantee!