Description
WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
SURPLUS ELECTRONIC
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
Please Note…
This unit has been lightly used, it has become surplus to requirements due to an improvement in health.
It has been thoroughly checked and cleaned by our service dept. and is in very good serviceable condition, see gallery photographs.
Height adjustable
Foldaway
Easy clean materials
The Drive DeVilbiss Folding Shower Seat is
constructed from aluminium and features height
adjustable legs for support. It also features a HD
polyethylene seat with drainage holes which folds
away to the wall to save space when not required.
It must be permanently fitted to a wall before use.
It has six 8mm diameter holes,
and should only be fitted by a competent person
and fastened to a wall which has the capacity to
withstand the vertical load and leverage applied
during use. Fasteners are not supplied because
the method of fixing will depend on material and
thickness of the wall. The person fitting the seat
will be able to supply suitable fasteners.
Set the required leg height before installing the plate to the wall. To set the
leg height pull out ‘E’ clip retaining the leg. Slide
the leg to the required position and reinsert the
‘E’ clip. Repeat for the other leg, ensuring before
legs are set to the same height.
Cleaning and Maintenance
It requires minimal maintenance.
Periodically check the wall fasteners and pivot
points are secure.
To clean the seat, occasionally wipe the seat with
a soft cloth using a mild household detergent or
disinfectant and warm water. Do not use harsh
abrasives or bleach as these can cause damage
and/or discolouration.
Shower Seat Safety
The bath seat should only be used as an aid
for sitting. Do not stand on or misuse the
bath seat.
Do not exceed the weight limit of the seat.
Some users and children may require
supervision whilst using the bath seat.
Specifications
Model: SWALL002 – Maximum User Weight 160kg
Seat is 48cm (19”) wide x 29cm (11”) deep and 12cm (5”) from the wall.
The height on the SWALL002 is 43 – 58cm (17” – 23”) to the top of the seat.
