Due to their age they will almost certainly require reforming see below…

Reforming Electrolytic Capacitors

Manufacturers claim that most old electrolytics can be saved if the correct procedure is followed, regardless of how long they have been unused. Such capacitors must be “reformed”. This process consists of applying rated voltage through a resistance (about 30,000 ohms, five watt) for five minutes plus one minute for each month of storage (see figure 6). As the capacitor reforms, the voltage across the resistor will drop (measured at the Xs in Figure 6). If that voltage will not drop below 10% of applied voltage after one hour, the capacitor is probably beyond help.

Reforming Electrolytic Capacitors

The process of reforming an old aluminum electrolytic capacitor consists of the application of rated voltage, through a resistor, for a period equal to five minutes plus one minute per month of storage.

The electrolytics appearing on the surplus market have often been in storage for a very long period indeed. Some manufacturers use a visible code, of which the first two digits indicate the year of manufacture.

The circuit shown in the sketch above works reasonably well. Apply the rated voltage through a 5W resistor. Anything from 20K-50K will do, as this is far from a precision process. The meter is used to measure the voltage drop across the resistor; when no current is flowing, there will be no drop. Obviously, when there is a large voltage drop (more than 20% of the applied voltage), there must be a significant current flow through the capacitor. The nature of a proper capacitor is to impede DC current flow, so when there is such flow, something must be wrong.

Note: Apply the appropriate D.C. voltage to the capacitor with a D.C. power supply. An old Kepco, Lamba etc. tube regulated lab power supply rig works great. Be sure to observe the proper polarity!

NB! This process should only be carried out by qualified engineers etc.

These parts came to us as part of a lot of surplus stock from a large ‘Milspec’ type Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’, they are however stored with us still in their original sealed packaging and with reforming (see above) are good serviceable capacitors, the photographs are representative of their excellent condition being of one of our actual stock, and, as with all our products they come with a full guarantee.