Description
WE ARE RICH ELECTRONICS
WE PURCHASE AND RECYCLE
SURPLUS ELECTRONIC
COMPONENTS AND EQUIPMENT!
For sale here we have the above…
Type MOD 534
7/8″ (22.2 mm) Multi Turn Wirewound Potentiometer – 10 Turn
Linearity +- 0.25%
ohmic resistance | 100000 Ω | |
Connection | Solder lug | |
Version | Wirewound potentiometer | |
Width | 19.1 mm | |
Rotary range, electrical | 3600 ° | |
Mechanic rotary range | 3600 ° | |
axle diameter | 6.35 mm | |
Length | 22.2 mm | |
Power | 2 W | |
max. number of revolutions | 10 | |
max. operating temperature | 125 °C | |
min. operating temperature | -55 °C | |
Assembly | straight | |
Track Taper | linear |
Noise 100 Ohm ENR
Screw slot adjust, but there is also enough shaft to fit a ridged control knob see our eBay item no. 390570878460 for the knob displayed in one of the above photographs.
Please note these knobs are available separately, you are buying the potentiometer only here!
Insulation resistance 1000 M Ohm minimum: 500 VDC
Dielectric strength 1000 VRMS minimum: 60 Hz
Absolute minimum resistance not to exceed linearity x total resistance or 1 Ohm, whichever is greater
Temperature coefficient: 20 ppm/°C (standard values, wire only)
End voltage: 0.25 % of total applied voltage, maximum
Phasing CCW end points – section 2 phased to section 1 within ± 2°
Taps Centre tap only
These Spectrol manufactured parts are now obsolete, modern equivalents now made by Vishay.
For datasheet search…MOD 534
Or go directly to…
http://www.vishay.com/docs/57065/533534.pdf
PLEASE NOTE!
These parts came to us as part of a lot of surplus stock from a large Milspec type Co. and have been kept in storage for some time, we have therefore classified them as ‘new other’. They are however pristine, stored with us still in their original packaging and ‘as new’ in all respects, the photographs are representative of their excellent condition, and, as with all our products they come with a full guarantee.
If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.