Texas SN74ALS374N Octal D-Type Edge Triggered Flip Flop 20PDIP MBD001i

£6.00

20 in stock

SKU: MBD001i Category:

Description

WE ARE RICH ELECTRONICS

WE PURCHASE AND RECYCLE

SURPLUS ELECTRONIC

COMPONENTS AND EQUIPMENT!

For sale here we have the above…

1 Piece

Manufactured by Texas distributed by RS

Packed mounted in a plastic chip carrier and sealed in an RS bag.

Product Overview

The SN74LS374N is an octal D-type Edge Triggered Flip-Flop with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The high-impedance 3-state and increased high-logic-level drive provide this register with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pull-up components. This device is particularly attractive for implementing buffer registers and I/O ports, bidirectional bus drivers and working registers. On the positive transition of the clock and the Q outputs are set to the logic states that were set up at the D inputs. Schmitt-trigger buffered inputs at the enable/clock lines of the S374 device simplify system design as AC and DC noise rejection is improved by typically 400mV due to the input hysteresis. A buffered output-control input can be used to place the eight outputs in either a normal logic state or the high-impedance state.
  • Full parallel access for loading
  • Buffered control inputs
  • Clock-enable input has hysteresis to improve noise rejection
  • PNP Inputs reduce DC loading on data lines
  • Pb-free product

Specifications

Status Discontinued
Logic IC Type BUS DRIVER
Sub Category FF/Latches
Family ALS
JESD-30 Code R-PDIP-T20
Load Capacitance (CL) 50.0  pF
Max Frequency@Nom-Sup 3.5E7  Hz
Max I(ol) 0.024  Amp
Number of Bits 8
Number of Functions 1
Number of Ports 2
Number of Terminals 20
Operating Temperature-Min 0.0  Cel
Operating Temperature-Max 70.0  Cel
Output Characteristics 3-STATE
Output Polarity TRUE
Package Body Material PLASTIC/EPOXY
Package Code DIP
Package Equivalence Code DIP20,.3
Package Shape RECTANGULAR
Package Style IN-LINE
Peak Reflow Temperature (Cel) NOT SPECIFIED
Power Supply Current-Max (ICC) 28.0  mA
Propagation Delay (tpd) 16.0  ns
Qualification Status Not Qualified
Seated Height-Max 5.08  mm
Supply Voltage-Nom (Vsup) 5
Supply Voltage-Min (Vsup) 4.5  V
Supply Voltage-Max (Vsup) 5.5  V
Surface Mount NO
Technology TTL
Temperature Grade COMMERCIAL
Terminal Form THROUGH-HOLE
Terminal Pitch 2.54  mm
Terminal Position DUAL
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Trigger Type POSITIVE EDGE
Length 24.325  mm
Width 7.62  mm
For datasheet search…Texas SN74ALS374N
Or go directly to…
https://www.datasheets360.com/pdf/-5655366655993629008

PLEASE NOTE!

These genuine vintage parts came to us as part of a lot of surplus stock from a large Milspec type Co. they have been kept in storage for some time, we have therefore classified them as ‘new other’. They are however pristine, stored with us still in their original packaging and ‘as new’ in all respects, the photographs are representative of their excellent condition, and, as with all our products they come with a full guarantee. 

If you have similar items to this, or indeed any electronic components that are surplus to requirements please contact us with details.

Stored with us still in their original tubes, you will receive the qty ordered in a cut length of tube.

Additional information

Brand

MPN

Related products