Description

WE ARE RICH ELECTRONICS

WE PURCHASE AND RECYCLE

SURPLUS ELECTRONIC

COMPONENTS AND EQUIPMENT!

For sale here we have the above…

1 Piece

The  PCB comes ready assembled with the 2 TIP transistors mounted on 2 separate Heatsinks

Complementary Silicon High-Power Transistors TIP 35C and TIP 36C

25 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS
60−100 VOLTS, 125 WATTS
Designed for general−purpose power amplifier and switching applications

The TIP35C is a silicon Epitaxial-Base NPN
transistor mounted in TOP3 plastic package. It
is intended for use in power amplifier and
switching applications.
The complementary PNP type is TIP36C.

TIP36C is a good high power PNP transistor available in TO-218 and TO-247 packages. The transistor is designed for general purpose applications and can be used in variety of general switching and amplification applications.

The maximum collector current of the transistor is -25A which is quite enough for driving variety of high current loads such as motors, high power LEDs, Bulbs, high power relays, part of a circuit and variety of devices. Moreover the maximum collector to emitter voltage is upto -100V which is an another plus point, with this high voltage capability you can easily drive loads under 100V. Other than that the transistor is also a good amplifier, it could be used to build high power audio amplifier or it could also be used in conjunction with the TIP36C in audio amplifier circuits.

TIP35C Specifications

Type Designator: TIP35C

Material of Transistor: Si

Polarity: NPN

Maximum Collector Power Dissipation (Pc): 90 W

Maximum Collector-Base Voltage |Vcb|: 140 V

Maximum Collector-Emitter Voltage |Vce|: 100 V

Maximum Emitter-Base Voltage |Veb|: 5 V

Maximum Collector Current |Ic max|: 25 A

Max. Operating Junction Temperature (Tj): 150 °C

Transition Frequency (ft): 3 MHz

Forward Current Transfer Ratio (hFE), MIN: 20

Package: TOP3

TIP36C Specifications

Type Designator: TIP36C

Material of Transistor: Si

Polarity: PNP

Maximum Collector Power Dissipation (Pc): 90 W

Maximum Collector-Base Voltage |Vcb|: 140 V

Maximum Collector-Emitter Voltage |Vce|: 100 V

Maximum Emitter-Base Voltage |Veb|: 5 V

Maximum Collector Current |Ic max|: 25 A

Max. Operating Junction Temperature (Tj): 150 °C

Transition Frequency (ft): 3 MHz

Forward Current Transfer Ratio (hFE), MIN: 20

Package: TOP3

The PCB Contains…

1 x TIP35C

1 x TIP36C

1 x TIP121

1 x TIP126

1 x LM358N 8 PDIP

4 x 1N5404

2 x BC556P

1 x 546C

1 x 2N3819

2 x Elna 35V 10000uF electrolytic capacitors

Various other capacitors, resistors etc. as can be seen in the photographs.

2 x LARGE BLACK ANODISED 10 FIN ALUMINIUM HEATSINKS

Type	Heatsink Extrusion
Material	Aluminum 6063-T5
Surface Finish	Black Anodized
Width	80mm
Height	75mm
Fin Height	30mm
Base Height	Approx 6mm
No. of Fins	10

The heatsinks come with various pre drilled and threaded holes two of which are used to mount the TIP transistors.

These units came to us already assembled as seen in the photographs, we believe they were intended to be incorporated into a high quality audio amplifier but these were never actually built.

The assemblies are stored with us packed loosey in manufacturer’s tote bins, they are unused and the component parts are in very good condition.

As they have been in storage for some time and are loose packed we have classified them as ‘new other’

PLEASE NOTE!